Operating Your Kodo Pro Vaporizer

The Kodo Pro is a compact vaporizer designed for 510-thread cartridges. To use it, connect a cartridge, power on with five clicks, adjust voltage with two clicks, and activate by holding the button. Preheating is available with two clicks for optimal vapor production, ensuring a consistent and controlled experience for various oil viscosities.

Getting Started

1. Charge the Device: Ensure the device is fully charged using the provided USB-C cable before first use. The screen will indicate charging status.
2. Power On/Off: Press the power button five times rapidly to turn the device on or off. The screen will light up to confirm.
3. Attach a Cartridge: Carefully screw your 510-thread oil cartridge into the top port of the device until snug. Do not overtighten.

Adjusting Voltage

The Kodo Pro allows precise voltage control. To adjust the voltage output, press the power button two times rapidly. Use the "+" and "-" buttons on the device to select your desired voltage between 1.8V and 4.2V in 0.1V increments. Lower voltages generally provide more flavor, while higher voltages produce denser vapor.

Preheat Function

For thicker oils or cold environments, utilize the preheat function. Press the power button two times rapidly. The device will preheat for 10 seconds at 1.8V, indicated on the screen. Press the button once to stop preheating if desired.

Vaping Operation

Once your cartridge is attached and voltage is set, simply press and hold the power button to activate the heating element and inhale from your cartridge. Release the button when you finish your draw. The device has a 15-second cut-off to prevent overheating.

Understanding Operational Settings