Apply moisture to the side burning too fast and ensure the material is packed evenly before lighting.

To stop a joint from canoeing, moisten the faster-burning side with saliva to slow it down. Ensure the roll is packed evenly and not too tight. Rotate the joint while inhaling to distribute heat uniformly, and always use a cherry that is fully lit before starting to puff.

Essential Prevention Techniques

• Consistent Grind: Use a tool to ensure all material is the same size. Large chunks create air pockets that cause uneven burning.
• Even Packing: Avoid packing the material too tight at one end. A uniform density allows air to flow through the center at a steady rate.
• The Proper Light: Hold the flame slightly away from the tip. Rotate the roll slowly while toasting the edge until the entire circumference is glowing.

Methods to Fix a Canoe During Use

1. The Saliva Method: Use a finger to apply a small amount of moisture just below the running side. This creates a firebreak and allows the slower side to catch up.
2. Rotation: Always hold the joint with the side that is burning slower facing upward. Heat rises naturally, which helps the top portion burn faster.
3. Relighting: If the canoe becomes too deep, extinguish the burn, trim the excess paper, and relight the tip evenly.

Comparison of Prevention Methods

Best Practices for Airflow

Using a filter or crutch provides structural integrity. This keeps the airway open and prevents the base from collapsing during use. A stable base ensures that every draw pulls air evenly through the length of the roll, significantly reducing the risk of side-burning or uneven heat distribution.