How to Clean RevWood Floors Safely and Effectively

Clean RevWood floors by sweeping daily, using a damp (not wet) mop with a pH-neutral cleaner, and avoiding harsh chemicals or steam mops. Blot spills immediately to prevent damage. Regular maintenance preserves the waterproof laminate's durability and shine while preventing scratches or warping.

Daily and Weekly Cleaning Routine

  • Sweep or vacuum: Use a soft-bristle broom or vacuum with a hard floor attachment daily to remove dirt and debris.
  • Dry mop: A microfiber mop picks up dust and pet hair without scratching.
  • Damp mop weekly: Use a well-wrung mop with a recommended cleaner (never soaking wet).
  • Avoid: Steam mops, abrasive pads, or wax-based products-they damage the protective layer.

Recommended Cleaning Solutions

  1. pH-neutral floor cleaner: Dilute as directed; ideal for routine cleaning.
  2. Vinegar solution (mild): Mix 1 cup white vinegar + 1 gallon warm water. Test in a hidden area first.
  3. Dish soap solution: 1-2 drops mild dish soap + 1 gallon water. Rinse with a damp mop afterward.
  4. Manufacturer-approved sprays: Pre-mixed solutions designed for laminate/vinyl floors.

Stain and Spill Removal Guide

Stain Type Immediate Action Cleaning Method Avoid
Liquids (water, juice) Blot with a dry cloth. Damp mop with pH-neutral cleaner. Let it air-dry; never rub vigorously.
Grease/oil Absorb excess with paper towel. Apply dish soap solution, then rinse. Abrasive scrubbers or bleach.
Ink/marker Dab with rubbing alcohol (70%+). Wipe gently, then clean with vinegar solution. Acetone or nail polish remover.
Chewing gum/candle wax Hardened? Use ice to freeze, then scrape with a plastic tool. Wipe residue with damp cloth. Metal scrapers or sharp objects.

Preventing Damage and Scratches

  • Furniture pads: Use felt or rubber pads under chairs/tables to prevent scratches.
  • Rugs/mats: Place at entryways to trap dirt. Use non-staining, breathable rugs.
  • Shoes off: High heels or cleats can dent the surface.
  • Sun protection: Use curtains/blinds to prevent UV fading.
  • Pet care: Trim pet nails regularly and clean accidents immediately.

Deep Cleaning (Every 3-6 Months)

  1. Vacuum thoroughly: Remove all dust/debris from edges and grooves.
  2. Use a laminate floor cleaner: Apply with a spray mop (avoid excess liquid).
  3. Spot-treat stains: Address stubborn spots with targeted methods from the table above.
  4. Dry completely: Ensure no moisture remains; use a dry microfiber mop.

What to Avoid

  • Steam mops: Heat and moisture can warp or delaminate RevWood.
  • Abrasive tools: Steel wool, scouring pads, or harsh brushes scratch the surface.
  • Ammonia/bleach: Discolors and weakens the protective layer.
  • Wax or polish: Creates a slippery, uneven finish.
  • Excess water: Never let liquid pool; wipe spills within 5 minutes.