Restringing Blinds Typically Costs Between $20 and $100 Per Blind
The cost to restring blinds varies widely, generally ranging from $20 to $100 per blind. Factors influencing this price include the type of blind, the number of cords, cord material, and whether you do it yourself or hire a professional. DIY kits are much cheaper than professional services.
Cost Factors for Restringing Blinds
- Blind Type: Different blind designs, such as mini-blinds, Venetian, or cellular blinds, require specific cord types and varying levels of effort.
- Number of Cords: Blinds with multiple lift or tilt cords will naturally require more materials and time to restring.
- Cord Material: Standard polyester cords are inexpensive, while specialized, heavy-duty, or braided cords may increase material costs.
- Blind Size: Larger or longer blinds need more cord length, impacting material expenses.
- Labor (Professional Service): The primary cost for professional restringing is the labor involved, which can vary based on complexity.
DIY vs. Professional Restringing Costs
| Method | Estimated Cost Per Blind | Estimated Time Investment |
|---|---|---|
| DIY Kit (Materials Only) | $5 - $25 | 1-2 hours (per blind) |
| Professional Service (Basic) | $20 - $50 | Varies (less hands-on time for owner) |
| Professional Service (Complex) | $50 - $100 | Varies (less hands-on time for owner) |
Opting for a DIY approach significantly reduces costs but requires personal effort and time. Professional services offer convenience but at a higher price point.
Steps for DIY Blind Restringing
If you choose to restring your blinds yourself, follow these general steps:
- Gather Supplies: Obtain new replacement cord, scissors, a tape measure, a lighter or fray-check, and potentially a threading needle.
- Remove Blind: Take the blind down from the window and lay it flat on a clean surface.
- Expose Components: Remove the caps from the bottom rail and potentially the headrail to access the cord mechanisms.
- Cut Old Cords: Carefully cut and remove the old, broken cords, noting their original path.
- Thread New Cords: Use a threading needle or tape the new cord to the old one (if still intact) to guide it through the blind's slats and mechanisms.
- Secure Cords: Re-tie knots at the bottom rail and within the headrail according to the blind's design. Trim excess cord.
- Reassemble and Rehang: Replace all caps and rehang the blind, testing its functionality.